In this report, we demonstrate that combining the laser heating system in a diamond anvil cell (LH-DAC) with a tandem acoustic-optical tunable filter (LH-DAC–TAOTF) allows for the simultaneous measurement of (a) the relative infrared (IR, 1070nm) power distribution on a specimen surface in the DAC; (b) the temperature distribution under laser heating of a specimen under high-pressure in a DAC; it also (c) provides an opportunity to control the shape of the IR laser spot on the surface of the heated specimen. The effect of the π-shaper on the shape and the position of the focus of the IR laser beam on a specimen using a TAOTF is also presented. For a 10× long-working distance objective, the smallest diameter of the IR laser was found to be around 10μm, when the focal plane coincides with that of the imaging optical system of LH-DAC. The highest diameter of the IR laser was shown to be 20μm when the rim of the π-shaper was set at 3μm. It is demonstrated also that the TAOFT not only permits to measure the two-dimensional (2-D) distribution of the IR laser power, but also allows for the alignment of the laser before each heating event at different pressures.